Blog

Nine Application Cases of High-Purity Alumina Micropowder


Release time:

2026-10-30

1. Ceramic Coating for Lithium Battery Separator

Single-sided or double-sided coating on PP/PE separators of power batteries and energy storage batteries. Function: It forms a high-temperature resistant ceramic protective layer on the separator surface. During thermal runaway, it inhibits melting and shrinkage of the separator to prevent direct contact and short circuit between positive and negative electrodes, greatly improving battery thermal safety. It also enhances the wettability of the separator and extends cycle life.

2. Raw Material for Sapphire Single Crystal (Classic Optoelectronic Application)

Used for growing sapphire single crystal ingots by the Kyropoulos method and heat exchange method, which are cut into sapphire substrates for LEDs. Function: Trace impurities such as sodium and silicon will cause crystal lattice defects, darkening and light leakage of single crystals, directly reducing LED luminous efficiency and yield. 5N-grade powder is an essential raw material for large-size high-quality sapphire. It is also applied in Mini/Micro LED substrates, optical windows, sapphire watch covers and infrared light-transmitting components.

3. CMP Abrasive for Semiconductor Chemical Mechanical Polishing

Raw material of polishing slurry for sapphire substrates, silicon carbide substrates, optical components and semiconductor lead frames. Function: Mixed with dispersants to prepare polishing slurry for nano-scale planarization, achieving ultra-low surface roughness (Ra<0.2 nm) to meet epitaxy requirements. Polishing for third-generation SiC power devices is a rapidly growing segment in recent years, and high-grade polishing powder is gradually realizing domestic substitution.

4. Alumina Ceramic Substrates for Power Electronics

Thermally conductive and insulating alumina substrates for IGBTs, MOSFETs, high-power LEDs and electronic control units of new energy vehicles. Function: High-density ceramic substrates are obtained via tape casting and co-firing, featuring excellent insulation, moderate thermal conductivity and high mechanical strength. Compared with ordinary industrial alumina, high-purity powder contains fewer impurities and lower dielectric loss, suitable for high-frequency and high-voltage power devices. It is a fundamental material for electronic control modules of new energy vehicles.

5. Transparent Alumina Ceramics

Used for high-pressure sodium lamp arc tubes, infrared detection windows and laser fairings. Function: High-purity powder can form grain-boundary light-transmitting polycrystalline transparent alumina ceramics under proper sintering procedures. It resists high-temperature corrosion by sodium vapor and delivers much higher luminous efficiency than traditional glass tubes. It also serves as material for some infrared optics and high-temperature observation windows.

6. Thermal Conductive Filler for EMC Epoxy Molding Compound in Electronic Packaging

Filler for molding compounds of automotive chips and 5G base station chips. Function: Spherical alumina is filled into epoxy resin to improve thermal conductivity while maintaining insulation and low dielectric loss for heat dissipation of power chips. Spherical powder enjoys good fluidity and controllable viscosity under high filling ratio, compatible with advanced packaging processes.

7. Biomedical Alumina Ceramics

Fabrication of dental alumina crowns, femoral heads of artificial joints and bone repair scaffolds. Function: It features strong biological inertness, no precipitation of harmful ions, outstanding wear resistance and good compatibility with soft tissues. Alumina ceramic joints have low wear rate and have been widely used in orthopedic implants for a long time. High-purity powder guarantees light transmittance and strength of all-ceramic dental restorations.

8. RF Ceramic Dielectric Filters for Communication

Dielectric resonators and RF filters for 5G base stations. Function: It adjusts the dielectric constant and temperature coefficient of ceramic dielectrics to stabilize communication frequency. Purity fluctuation of powder directly causes frequency drift of devices, so strict requirements are imposed on batch consistency.

9. Powder for Thermal Sprayed Ceramic Coatings

Plasma sprayed coatings for aero-engine blades, metallurgical rollers and chemical valves. Function: It forms dense coatings with high temperature resistance, wear resistance and insulation performance, providing anti-oxidation and anti-corrosion protection for substrates under severe high-temperature working conditions.